News

Service quality wins user satisfaction

Comparison of selection details and use of hydraulic connectors

Release time

2022-07-20

When selecting and using stainless steel joints, it is necessary to follow the model selection standards of the product, and pay attention to the type and temperature of the fluid during selection. Select the appropriate fluid type, temperature, and sealing material. Depending on the fluid, the appropriate material and sealing material are different. For example, the connector is gaseous. It is strongly recommended to make it from steel. For water, choose red copper or 304 stainless steel. During the process of selecting automotive rotary joints, it is also necessary to care about the working pressure of the liquid. Please select a joint with a compressive performance that is suitable for the working pressure of the fluid. The burden of the fluid is also important in selecting the joint.

The natural environment for the application of the joint, and the structure and material of the joint suitable for the application conditions are selected. Combining the environmental humidity standards of application conditions, the situation of floating dust, and the natural environment where corrosion is very easy to occur, taking into account the type, material, and sealing material of the selected joint. When selecting a flared joint from the manufacturer, it is necessary to ensure that the selected joint connection external threads are consistent. During the entire application process of products with different brands, the female and male heads of the same brand should be used in conjunction with each other. If cross application is necessary, it is recommended to consult the professional and technical personnel of the product supplier before application and determine whether to use it again later. The appearance and specifications of the installation must also be considered by everyone. The specification and material of the joint, as well as the installation appearance and specification of the specific corresponding pipeline characteristics. It is important to note that specifications are related to the total fluid flow.

There are many applications of rotary joints for mining, and they can be used in many pipeline system software, such as hydropower projects and their hydraulic transmission systems. The natural location is different, and the commonly used connectors vary. Just like the smallest mobile phone conversion RF connector, it can also be considered a car flared connector. Therefore, its significance is very simple, which is to serve as a transitional function, connecting two products that cannot be immediately connected according to the joint. However, no matter what kind of system software it is applied in, what is the actual application site, and the effect is all to carry out the transition and ultimately achieve the goal of connecting with each other. When purchasing, it is necessary to determine which level of connector is used, and then understand the corresponding model specifications. Only by understanding the efficacy of such joints and the products necessary for them can you go through a detailed review of the models and specifications. When purchasing automotive right-angle joints, you must first establish the necessary types of joints, and then pay attention to the basis and actual requirements for selecting the specifications and models of the joints.

Subsequently, select a company for close selection. The type of company and its business scope are also the way to purchase and select. If the company is not the key operator of this category of products, you must carefully consider that because the company's involvement in excessive breadth does not mean that the product attaches excessive importance to quality, it is likely to only engage in simple exploration in this field and just want to enter. "We should find a company that has a long history of operation and a good reputation for products to understand. Price comparison is also indispensable, so that we can choose a good product under a larger equity situation.". To ensure a good selection of connector models, thereby ensuring that everything can be properly installed and applied. For example, for the connectors used in hydraulic transmission systems, there will be a wide range of models and specifications, as well as a wide range of product types. You do not need to master all of them, as long as you want to order them.